Reference Build
The Shelf Lab
A complete, quiet homelab that fits on a single bookshelf and idles at about 50 W. It separates the firewall from everything else, segments the network properly and backs up like it means it. This is the build we recommend to most people starting out.
- 50 WMeasured idle at the wall
- 438 kWhEnergy per year
- 5.8 TiBComfortable storage at 80%
- SilentFanless or near-silent parts
Who it is for
The Shelf Lab is for someone who wants to learn and to run a handful of household services without a rack, a closet or a noise complaint. It lives happily in a home office or living room. It is also where our own editors would start again if we lost everything tomorrow.
Parts by role
| Firewall | Fanless x86 mini PC with two to four 2.5 GbE ports, 8 GB RAM, small SSD, running an open-source firewall distribution |
| Switch | 8-port managed switch with VLAN support and PoE on at least two ports |
| Wireless | One ceiling-mounted access point powered by PoE, with three wireless networks mapped to VLANs |
| Hypervisor host | Business-class mini PC with 6 to 8 cores, 32 GB RAM and a 1 TB NVMe SSD |
| Storage and backup | Two-bay turnkey NAS with two 8 TB CMR drives in a mirror |
| Power | Line-interactive UPS around 600 VA, protecting everything above |
| Approximate cost | $1,300 to $1,900 at late-2026 prices, depending on drives and whether the mini PC is bought used |
Measured power
| Device | Idle at the wall |
|---|---|
| Firewall appliance | 8 W |
| Managed switch, before PoE loads | 6 W |
| Access point, powered by the switch | 6 W |
| Mini PC hypervisor with a typical load of VMs | 10 W |
| Two-bay NAS, drives spinning | 16 W |
| UPS self-consumption | 4 W |
| Total | 50 W, about 438 kWh a year |
At 17 cents per kWh that is about $74 a year, less than many single streaming subscriptions. Recalculate for your own prices with the Power Cost Calculator.
Network plan
The Shelf Lab uses our standard example addressing, with five VLANs carried from the firewall to the switch on one trunk:
- VLAN 10, Management, 10.42.10.0/24: switch, access point, hypervisor and NAS administration.
- VLAN 20, Trusted, 10.42.20.0/24: household laptops and phones.
- VLAN 30, Lab, 10.42.30.0/24: VMs and containers, including the home automation hub at 10.42.30.20.
- VLAN 40, IoT, 10.42.40.0/24: smart devices, internet only plus the hub.
- VLAN 50, Guest, 10.42.50.0/24: internet only.
Remote access is a WireGuard VPN on the firewall using 10.42.99.0/24. Nothing else is published. See VLANs and Segmentation.
What it runs
- Firewall: routing, DHCP, the local DNS resolver with conservative filtering, and the VPN.
- Hypervisor: one container host VM running a photo library, notes sync, a feed reader, an uptime dashboard and a reverse proxy; one VM for the home automation hub; and a stopped template VM for experiments.
- NAS: file shares, the target for nightly VM backups, and the hub for file sync from household devices.
32 GB of memory comfortably runs all of this with room for a couple of experimental VMs at a time. Our Mini PC Hypervisor Build project walks through setting up exactly this host.
Storage and backups
Two 8 TB drives in a mirror provide 8 TB, which the operating system reports as about 7.3 TiB. Keeping below 80 percent full leaves about 5.8 TiB of comfortable space. The Storage Capacity Calculator shows the same numbers.
- Copy 1: live data on the NAS, with hourly and daily snapshots.
- Copy 2: nightly backups of every VM to the NAS. File sync from laptops and phones adds a convenient extra layer for the newest work, but we do not count it as a copy.
- Copy 3: an encrypted weekly backup of the irreplaceable tier, mainly photos and documents, to cloud object storage, with the key stored in the password manager and on paper.
As built, the NAS holds both the live files and the VM backups, so most data exists in two places rather than three. That is a known weakness, and the first upgrade below brings the Shelf Lab to full 3-2-1. See Backup Strategy.
Upgrade path
- Add a second small NAS, or a small always-on computer with a large USB drive, that pulls nightly backups from the first NAS with its own credentials.
- Add a second mini PC when memory runs short, and spread VMs across both.
- Move to a larger NAS and a camera VLAN when the household wants local cameras. At that point you are building the Closet Lab.